How to build a bubble tea kiosk ?

When you walk in a shopping mall , you will come caross a lot of kiosks,and when you going to a food center , same again you will see a lot of very nice design food kiosk and beverage kiosks, and bubble tea kiosk is one of them which is popular in recent years.

So when you learn a how to make nice tea and want to be a boss ,and start to sell bubble tea, you may want to get a bubble tea kiosk or bubble tea station , or maybe you call it stall or booth , anyway a plce that you can do your business ,

you can get a easy job to build a bubble tea kiosk : find a factory in local that can do the full job , design -build -installation ,but in this way you may need to pay a lot of money ,and you do not know what is what ,and why this is so expensive ,and why that part is nessary ?

Thus to get an idea of how a bubble tea kiosk is buld will help you learn more about your business and when you want change a kiosk or you want to open second kioks will be much more easier.

after you read this arcticle you will know how to build a bubble tea kiosk

Here Lets beigin

First step of build kiosk is to cutting material.

But to do this step ,of course you need to finish a design first ,you need to have 3D design of the bubble tea kiosk as well as construction drawing , so the workers in workroom can exact follow the design to build the kiosk , to get a free design from Myidea , The custruction drawing must very clear with all the dimensions and material list , so the worker need to calculate which panel in what size and cut the material , we call this step is prepare material

The second step is to set up wooden frame work for bubble tea kiosk

This step is usually done in wooden workroom , the experience carpenters will use nail gun and glue to sep up the frame work of a kiosk ,Normaly in myidea kiosk , a kiosk will be split into several smaller piece cabinet , so the worker just exact follow the designer idea to build the kiosk ,

in this step . the measure is most important , the workers much have a clear idea of whcih part is what dimension , so the can fit each other when assemble . after this step you will have an idea of how a kiosk is look like ,

The Third Step is surface finish of kiosk

There are Normally two way of surface finish of kiosk , one is polish and doing baking paint finish , one is lamination finish ,

baking paint finish : in australia they wall it two pac finish . this have a good adventage that all the colors will be perfect , because it;s painted so all the joiners will be very smooth , but paint of course more expensive ,

Another way is lamintion , as far as you know about Formica or Wisnurt , you will understand what is lamination .

or you can go to bed room to check your wordrobe ,most of it made of lamination , lamination job ,is not so nice because of the joners ,but lamination surface is hard , so many food kiosks or bubble tea kisosk , they like to choose lamination finish for the kiosk . you can go to UKS website to find more info on lamination

The Fourthe step is installation

installation is easy but most careful job , this job determine a kiosk in good and bad quality , so this step looks very easy ,but has a lot of details to look after ,in myidea ,this step is always done by experince worker. so here;s the step

==>a,insatll corion countertop

==>b,install glasses

==>c,install electricity and lights sockets and DB box

==>d,install LOGO

==>f,install doors and handles and lock